PDS_VERSION_ID = PDS3 RECORD_TYPE = "STREAM" LABEL_REVISION_NOTE = "24 Apr 2002, A.C.Raugh: Creation 2005-1-31 D.Tarico: Merged the catalog file with information in OLAF. This changed instrument_host_name to be more descriptive and added GROUP information to the description.. JUN 2009: Jesse Stone/Michael Wendell corrected error in the LATITUDE/LONGITUDE" OBJECT = INSTRUMENT_HOST INSTRUMENT_HOST_ID = "MCD21" OBJECT = INSTRUMENT_HOST_INFORMATION INSTRUMENT_HOST_NAME = "MCDONALD OBSERVATORY 2.1-M STRUVE WARNER & SWASEY REFLECTOR" INSTRUMENT_HOST_TYPE = "EARTH BASED" INSTRUMENT_HOST_DESC = " Instrument Host Overview ======================== McDonald Observatory Otto Struve 2.1m (82in) Telescope The information included here was extracted from the McDonald Observatory web site at: http://mcdonaldobservatory.org/ on 24 April 2002 by A.C.Raugh. Observatory Information ======================= McDonald Observatory is administered by the University of Texas at Austin. Telecsopes are located on Mt. Locke in the Davis Mountains of West Texas. East longitude: -104 01.3 Latitude: +30 40.3 Elevation: 2075 meters above sea level Telescope Information ===================== Otto Struve optical telescope Primary Mirror Diameter: 2.08m (82 in) Focal Length: 8.13m (26.7 ft) f-ratio: 3.90 Field Angle: 63.5 arcmin Plate Scale: 25.4 arcsec/mm The telescope has two focal points: Cassegrain Coude f/13.7 f/22.9 Focal Length 28.53m/96.6ft 47.70m/156.5ft f-ratio 13.65 22.9 Field Angle 20 arcmin ---- Plate Scale 7.25 arcsec/mm 4.3 arcsec/mm The Coude focus is not presently in use. GROUP = OBSERVATORY_PARAMETERS OBSERVATORY_ID = 'OBS445' NAME = 'MCDONALD OBSERVATORY' COUNTRY = 'USA' ADDRESS = 'University of Texas; P.O. Box 1337; Fort Davis, Texas' END_GROUP = OBSERVATORY_PARAMETERS GROUP = TELESCOPE_PARAMETERS TELESCOPE_ID = 'T2' NAME = '2.1-M STRUVE WARNER & SWASEY REFLECTOR' APERTURE = 2.1 LONGITUDE = -104.022255 /* -104 01 20.12 E */ LATITUDE = 30.671583 /* +30 40 17.7 */ ALTITUDE = 2069 COORDINATE_TYPE = 'Unknown' END_GROUP = TELESCOPE_PARAMETERS" END_OBJECT = INSTRUMENT_HOST_INFORMATION OBJECT = INSTRUMENT_HOST_REFERENCE_INFO REFERENCE_KEY_ID = "N/A" END_OBJECT = INSTRUMENT_HOST_REFERENCE_INFO END_OBJECT = INSTRUMENT_HOST END